Services
End-to-end engineering: design to as-built
One team carries the project through every engineering stage, so nothing is lost between them. MEP engineering is our in-house core; architecture and structure are delivered with our partners under one DABWORKS lead.
SERVICE 01
Engineering design
Concept to detailed design for building services, with the calculations and reports that support it.
- HVAC, plumbing, drainage, fire-fighting, electrical power, low-current systems
- Cooling load, ventilation, smoke management, static pressure and hydraulic calculations
- Equipment selection, schedules and technical specifications
- Cold store and refrigeration design
- Design review and value engineering
- Architectural and structural design through our partners
SERVICE 02
BIM
Models built to be used on site and after handover.
- 3D modelling to LOD 300, 350, 400 and 500
- Multidisciplinary coordination and clash detection
- BIM Execution Plans and information management to ISO 19650
- Quantity take-off from the model
- Automation with Dynamo and custom tools to shorten repetitive work
SERVICE 03
Construction engineering
The technical office work a contractor needs from award to handover.
- Shop drawings for all MEP trades
- Combined services and coordination drawings
- Builders-work, sleeve and opening drawings
- Bills of quantities and material submittals
- As-built drawings, as-built models and O&M manuals
SERVICE 04
Visualization, 4D and VR
Showing the project before it is built.
- 4D construction sequence simulation linked to the programme
- Rendered views and walkthroughs
- VR reviews for plant rooms, corridors and complex spaces
See it for yourself
What coordination and model detail change
Two things contractors ask us about most. Drag the slider and step through the levels.
Clash detection: before and after
A corridor ceiling in section. Every clash found in the model is one that is not found on site.
Level of detail: LOD 300 to 500
LOD 500: verified against what was installed. Used for as-built records and facility management.
Tools and standards
The platforms and codes we work to
| Area | Platforms and standards |
|---|---|
| Authoring | Autodesk Revit, AutoCAD |
| Coordination | Navisworks, Autodesk Construction Cloud (BIM 360) |
| Automation | Dynamo and custom tools |
| Calculations | Carrier HAP, Elite hydraulic calculation |
| Standards | ISO 19650; ASHRAE, SMACNA and NFPA; Saudi Building Code; Egyptian codes of practice |
| Model detail | Up to LOD 500 (verified as-built) |
Need a technical office on call?
A team of more than ten engineers and modellers that scales with your programme, so submission dates hold.